Product Overview
**THIS IS NOT MY DESIGN, WE MADE SLIGHT MODIFICATIONS, BUT ALL CREDIT GOES TO PEMBIE**
This independent aftermarket product is offered by Freedom Finger Triggers LLC and is designed for compatibility with the following GLOCK® pistol models: 17, 19, 19X, 20, 21, 22, 23, 26, 43X, and 48. You must disassemble your existing trigger assembly to install. COMES WITH A DURABLE TRIGGER SHOE AND FFT CUT TRIPS (3 sizes). Oil your gun for best results, especially the top of the barrel/underside of the slide. WARNING this does NOT have a trigger safety.
***FOR BEST RESULTS PLEASE FOLLOW THE OPTIMAL SETUP BELOW***
*NOT TESTED WITH AFTERMARKET SLIDES OR BARRELS. WE CANNOT GUARANTEE PROPER FUNCTION ON THEM.*
The trigger is NOT compatible with an ambidextrous slide release/catch (Gen 5/6). You must remove it or replace it with a Gen 1-4 slide release/catch to keep that function.
OPTIMAL SETUP:
-20lb recoil spring
-3.0lb Ghost Unit or Ghost Edge connector
-4lb striker spring (might get light strikes with hard primers)
-Lighter safety plunger spring
-Oil (barrel/underside of slide/slide rails)
-Light trigger pull when shooting
WARNINGS:
- By purchasing or using this product, you are accepting responsibility and liability for the serviceability of the final installation, as well as any damage or wear that may occur to your firearm.
- Improper installation or use of this device may lead to unintentional discharge of the firearm that may lead to injury or even death.
- We recommend installation be performed by a Professional Gunsmith.
- After the device has been properly installed, it is imperative that all users seek qualified training on how to use this product.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
